Warren Cilliers owns Cilliers Aviation, a maintenance business in Palatka, Florida, where he works primarily on aerobatic airplanes, such as the Extra 330SC. He also travels the world as technician for Michael Goulian and Team 99, as Goulian competes in the Red Bull Air Race World Championship. In both endeavors, Cilliers uses a DynaVibe Classic to perform dynamic propeller balancing. “Definitely used the DynaVibe and it’s really helped us out,” says Cilliers.
In the past year, Cilliers estimates he has used DynaVibe to complete 40 prop balances. “That's without advertising,” says Cilliers. “It's really just my customers that come through my shop and word of mouth in the area. It's been great.”
Cilliers understands the preventative maintenance benefits of keeping propellers balanced: “It's obviously very important on any aircraft, not only aerobatic airplanes, for fatigue and wearing of parts, gears in the engine, magnetos, everything, even going down to fatigue on the airframe, with vibration and cracks on the aluminum and things like that.” Because of the benefits, dynamic balancing with DynaVibe has become a standard procedure Cilliers does for his customers. “It's so easy to work. I've got it down to an art now, where I can just take it out in my ground run, and just balance it for them. They really appreciate it.”
Cilliers is getting great results from balancing with DynaVibe that his customers can feel. “I've never had any negative report back from any customer. Whenever I do a balance, even if it's not as much out-of-balance [to start with] – where I think the customer would not even feel it – they always report back that they notice a difference.”
Customers feel the difference and get the benefits of Cillier’s balancing work. With DynaVibe, the balancing process is easy and the payback on the investment in the balancing equipment has been excellent. “The simplicity of DynaVibe makes it easy. It's been great, and well worth the $1,600 that I've spent. I've probably paid for it about 10 times already, so I’m very, very pleased with it.”
Let's go fly! ...maybe not.
The current METAR made me think twice:
KSWO 302253Z 03008KT 10SM BKN024 OVC030 M07/M13 A3033
Below freezing. Low clouds. Should I worry about the aircraft accumulating ice? I've read [1,2] that most aircraft icing occurs when air temperatures are between 0 °C and -20 °C and I wondered how difficult it would be to verify that claim. Here's what I found.
First, I downloaded several hundred PIREPS from aviationweather.gov. Then I filtered the PIREPS for those that reported ice along with the atmospheric temperature.
For example, here the pilot is reporting rime ice with an atmospheric temperature of -13 °C:
TYS UA /OV TYS/TM 1331/FL130/TP E145/TA M13/IC MOD RIME ICE/RM ICING STARTING AT 130 AND ENDING AT 115
Next, I constructed a histogram of the atmospheric temperatures with reported ice, and here is the result.
What is amazing is that this plot is comprised of just 29 pilot reports and it agrees perfectly with the original premise that aircraft structural icing occurs most often between 0 °C and -20 °C. That's good information to know before poking your head into cold clouds.
We sometimes refer to our offices here at RPX Technologies HQ as "nerdville" because our work involves lots of "techie" tools like 3D printers, laser cutters, compilers, mathematical simulation software, and an array of gadgets and electronic test equipment that bring out the inner nerd in us. So, when we get questions about the science behind how DynaVibe actually works, there's almost a competition to see who can be first to answer the question!
Last week we got a question that we loved, because it lets us talk about the principles behind how DynaVibe prop balancing equipment works. Here's what came in:
Q: Balance limits are usually specified in IPS (inches per second). But an accelerometer measures acceleration (G-forces) which are measured in inches per second per second (in/sec^2 [IPSS]). Which is actually measured? If it is IPS, how is that determined from the acceleration?
Kudos to Tom, the submitter of this question through our firstname.lastname@example.org email address (where anyone is welcome to correspond with us)! Here's the answer:
A: You are correct. Vibration is often measured using accelerometers, which directly measure acceleration (e.g., IPSS). Acceleration must be converted to velocity (e.g., IPS) by also considering the frequency of interest and doing the math. The DynaVibe is doing this conversion continuously using one of several methods depending on the operating mode.
You may be wondering why IPS (velocity) is reported, and not IPSS (acceleration). The reason is that velocity is more indicative of machine damage from vibrations in the "thousand cycles per minute" range (for example, engine or prop RPM). While not aviation specific, various standards (notably ISO 10816) cover vibration analysis for machinery of various types, sizes, and rotating speeds. Charts like the one below (notice that velocity in IPS is on the left vertical axis) are quite common in the machinery world:
At very high frequencies (i.e., ultrasonics), acceleration is commonly used and is often reported in "g" units. (This is what the DynaVibe GX3 with Turbine Kit, with our high speed accelerometer, measures and reports in VibeSurvey and Williams modes).
With many of the DynaVibe GX3 modes that utilize our standard accelerometer, such as Spectrum mode, we default to velocity, in IPS, with the option to switch views to acceleration, in IPSS.
By the way, as frequencies get very low, displacement is used (i.e., low frequency fatigue/bending). This typically uses different instrumentation than for acceleration and velocity.
How does all of this lead us back to velocity and IPS? Propellers just happen to be in that middle range shown in this graph, where velocity is the best indicator of damage and the preferred U.S. unit of measure for propeller vibration is IPS.
We love getting questions like this, so if you have one you want to ask, please use our "Contact Us" form to let us know what's on your mind.
An ounce of prevention is worth a pound of cure. This adage certainly applies to aircraft preventative maintenance. Take, for example, significant main rotor imbalance: it’s relatively easy to detect, because the pilot can often feel the vibrations from the imbalance in their back or the seat of their pants. This sensation usually prompts some preventative maintenance, before there is significant damage to components and impact to the bottom line.
With something like a tail rotor or fan wheel imbalance, however, the vibrations are rarely identifiable in the cockpit. Fatigue cracks and an unplanned out-of-service ship may be the first, obvious sign that something is wrong. What follows is a repair that is often time-consuming, expensive, and rarely conforms to your schedule. It’s more cost-effective and operationally efficient to invest in preventative maintenance than to repair damage.
Balancing fans are an aspect of preventative maintenance that can save expensive repair bills. For instance, consider the Robinson R22, where Robinson documentation states that “Fan balance must be checked upon installation; fanwheel imbalance can cause damage.” As the accompanying photographs show, this damage often reveals itself in the form of fatigue cracks in the engine cowling, requiring expensive repairs.
With the proper diagnostic equipment, such as the DynaVibe GX3 dynamic balancing system, checking for fan imbalance becomes a relatively simple procedure. You can use DynaVibe to objectively measure whether the fan wheel has a significant imbalance that may slowly but steadily be creating a fatigue-crack time bomb. A fan wheel vibration check is done with the same accelerometer and optical tach used to balance the main rotor, by simply moving the optical tach and left accelerometer to the fan, with the accelerometer typically pointed toward the centerline of the fan rotation as shown (the DynaTrack optical blade tracking accessory is not required for this procedure). Because in-flight aerodynamic factors are not involved, the entire procedure is typically done using ground runs exclusively, without hover or flight runs.
If the analysis shows that the fan is outside of the acceptable balance parameters, the DynaVibe system will step you through the balancing procedure. Follow the helicopter manufacturer's procedures. It may be helpful to refer to the RPX supplemental DynaVibe user manual and helicopter-specific application notes to assist with DynaVibe setup and operation.
Select the "Contact Us" link near the bottom of this page to discuss fan balancing with an RPX representative or to learn more about RPX helicopter track-and-balance solutions.
As a provider of dynamic prop balancer, aircraft vibration survey, and helicopter track-and-balance systems to the aviation maintenance industry, we meet a lot of great people who are interested in high-quality maintenance work while minimizing maintenance costs. Our experience has revealed a maintenance procedure where cutting corners can be costly: making helicopter trim tab adjustments. Here are some tips about this procedure that may prevent wasted time and unnecessary expense.
Tip 1: Use High-Quality Trim Tab Gauges
Helicopter mechanics need high quality trim tab gauges and, in some cases, the gauge is specified by the manufacturer for a particular blade set. The best trim tab gauge designs for most rotorcraft blades utilize dial indicators on a frame that attaches to the blade in a very repeatable way. These types of trim tab measurement instruments support accurate and reproducible measurements of the blade tab position.
This trim tab measurement reproducibility is critical when it comes to tracking blades. Before making any adjustments, the mechanic should verify that the same measurement can be made repeatedly. The mechanic should be able to put the trim tab gauge on the blade, make a measurement, remove the gauge, and repeat this sequence two more times, obtaining the same position result every time. If the measurements aren’t repeatable, the mounting technique should be reviewed and the tool should be checked to verify that it is functioning properly, and that it is the correct one specified for this blade set. Verifying that the gauge readings are reproducible before making the first tab adjustment can save many hours later.
In addition to reproducibility, trim tab measurement accuracy is also important because incredibly small adjustments can affect forward flight vibration. For a Robinson R22, a 0.015” tab adjustment can produce almost a quarter of an inch change in blade track. This is more than enough to cause a noticeable increase (or decrease) in vibration.
Tip 2: Use Recommended Tools for Tab Bending
Use the recommended tab adjustment tool when bending blade trim tabs. A lot of improper tools are used to make adjustments, from vice grips to sledge hammers (really). It is extremely important that the manufacturer’s recommended tools are used to adjust trim tabs and keep in mind that a tab bending tool appropriate for one set of blades may be the wrong tool for a different set of blades.
Robinson trim tabs, for example, should not be adjusted by simply applying torque to the tab about the tab’s root. Robinson trim tab adjustments are produced by more of a curling action resulting from three precisely applied forces that are generated by Robinson’s tab bending tool as shown below.
If tabs are bent improperly, the result can be costly. For instance, one mechanic thought that the trim tab on a Robinson was adjusted just like many other blade tabs, simply by bending the trim tab down. After a couple of flexing adjustments using the wrong tool, the rotor blade responded with a loud pop and an expensive replacement bill. There is a reason that Robinson sells a custom device for adjusting their trim tabs.
An underlying question for both of these tips is: how can you know the proper adjustments to make to helicopter trim tabs? The answer is given by the blade offsets measured by the DynaTrack, the vibration measured by the DynaVibe accelerometers, and the procedures in the helicopter manufacturer’s maintenance manual. However, if the mechanic doesn’t have the correct tab bending tools and trim tab gauges to make these adjustments safely, precisely, and accurately then the process will take longer at best and could be a costly mistake if the tabs are bent improperly.
As a business owner, you strive to grow your company, increase revenue, and reduce costs. One way to do all three is to purchase the right equipment for use in your trade or business. In many cases, you can do this through a Section 179 deduction.
Within the rules of Section 179 of the IRS Tax Code, a business may be able to legitimately deduct, for the current tax year, the full purchase price of qualifying equipment placed into service before December 31st of the year the deduction is to be taken. Before making a new equipment purchase, talk with your tax adviser or CPA to see to if your business can use the Section 179 deduction for a tool purchase. To learn more about Section 179 deduction, read the IRS publication 946: "How to Depreciate Property."
Here are the steps for cutting your tax bill with a DynaVibe purchase:
Must be acquired for business use. Must be acquired by purchase. Tax-exempt organizations, estates, and trusts cannot elect the section 179 deduction. Business income limits may apply.
DynaVibe with DynaTrack Simplifies Track-and-Balance for Sheriff Department's Helicopter Fleet, Improving Maintenance and Pilot Comfort
Whether you’re maintaining a fleet of helicopters or a single ship, blade tracking and balancing shouldn’t be a full-time job. When you do pull out your tools to do your next track and balance, will the tools complicate the task, or simplify it? RPX Technologies recently spoke with the mechanic for a county sheriff aviation unit in the southeast U.S. about the right tool for the job and how switching to the DynaVibe GX with DynaTrack made his job easier.
The department had previously purchased a competing track-and-balance system, but this mechanic shared that “I'd go for long periods of time and we didn't have to do a track and balance, and then you kind of relearn it every time you do it.” The mechanic recalled that the competing system “was way smarter than I was and a little more complicated than I was used to working with. I struggled through using it a few times and at one point, I contacted manufacturer for a field rep to come and help me again. They were willing to do it, but they were going to charge us an extreme amount of money to do that, to train us. That's the time I figured we needed to start looking at something a little less complicated.”
The DynaVibe GX3 balancer when coupled with the DynaTrack optical blade tracking system is efficient, accurate, affordable, and easy-to-use to perform helicopter blade track-and-balance. “We purchased a DynaVibe system,” noted the mechanic. “It's easy to install and set up. To operate it… probably took me less than an hour and 45 minutes to get everything done.”
His first use of the DynaVibe balancer was on a ship where the crew had just changed out the main rotor hub. During the initial track and balance process, he found that “the vertical wasn't too bad, but the lateral vibrations were pretty bad,” explained the mechanic. “After I made the PC link adjustment to bring the blade down, that helped the lateral quite a bit. And then on the second run after that, the DynaVibe system told me that I needed to add weights to the blank blade bolt and I did that. You could feel it just getting better on each run. I was impressed. We finished tracking it out and I was really happy with the way the system works.”
The department has multiple OH-58 helicopters and the mechanic’s goal is to always have at least two aircraft available for flight operations. As important is ensuring the helicopters are not degrading the ability of the crew to function. “There's always a primary and a backup aircraft,” explained the mechanic. “Our guys fly missions and they'll do orbits over the target area, and they fly three to four hours a day sometimes. It's easier on them, when they're not getting beat to death by the aircraft being out of track, and it's easier on the aircraft too.”
This mechanic summarizes his experience using DynaVibe and DynaTrack: “I’m really happy with the way the system works and everything. The RPX rep called and checked on me to see how my progress was, and we sat and talked about the readings I was getting and everything. I'm real satisfied with the service. There’s a great support system there for the customer, and that's a good selling point for these systems. Kudos to the DynaVibe guys; they’ve got a good product.”
Visit the Rotorcraft section of the RPX online store, or click the yellow "Contact Us" tab below to learn more about helicopter track-and-balance solutions.
Proud owner of a Jet Exec (turbine) RotorWay helicopter, Joseph Luiz completed his build in late 2017. In attendance for the 2015 EAA AirVenture fly-in convention (Oshkosh), he scoured the grounds to find an affordable, easy-to-use track and balance system for his RotorWay copter. Joe states “I went to Oshkosh with a mission; I went to every single booth that was providing this type of equipment because I needed something that worked flawlessly and provided peace of mind."
Before acquiring a track and balance solution, Joe had an unsuccessful attempt to balance the high-speed tail rotor on his RotorWay. “I ended up bending a shaft because I really didn't know how to properly balance.” At AirVenture, Joe visited the RPX Technologies booth where he discovered and bought a complete DynaVibe system with the DynaTrack optical tracking accessory. The DynaTrack simplified the helicopter track and balance with built-in setup information specifically for his RotorWay, as well as a compiled database of other helicopter systems.
Joe is using DynaVibe and DynaTrack to perform dynamic main and tail rotor balancing, as well as blade tracking. “It's been very simple and easy to use. With rotorcraft, you've got all this dynamic action occurring in unison, so it has to be just right. There is truly no margin of error, and I found DynaTrack helps eliminate that error.” He was able to track and balance his RotorWay’s main blades in a hover with one reading and one slave blade adjustment. DynaTrack representatives recommended that he begin the process by doing a hover track to make an initial assessment: “I did the readings and found I was three quarters of an inch out on my slave blade. I consulted the documentation, and it looked like I needed to make a pitch change on the slave blade to bring it down to match the master blade. I made a half turn on the slave blade and brought it within a tenth of an inch, and it was a night and day in performance. It was amazing, and I did that with one measurement! The change in performance and vibration levels was just phenomenal.”
Joe continues to use his DynaTrack to achieve optimal performance. “I'm flying, and I'm doing my dynamic main rotor blade tracking right now using the DynaTrack.” Joe also uses the DynaVibe system to balance the tail rotor. The result is a smoother flight and peak performance. Eliminating the vibrations that come from unbalanced or out-of-track rotors also reduces stress on the airframe, engine, and instruments. “For the amount of money that I spent and the functionality of the equipment, it was a no-brainer. The price was important to me because I'm not in the business of doing this. I wanted to get the best equipment I could without breaking the bank. Overall, I'm very satisfied with the equipment.”
His advice to fellow builders and/or owners? “Don’t beat around the bush on this one, the DynaTrack will ultimately save you thousands of dollars in prevented misbalances, provide optimal performance, and ensure peace of mind in its use. Simply put: just buy it.”
Learn more about DynaTrack by clicking on the yellow, "Contact Us" tab near the bottom of this page.
With ATC watching for traffic and aware of my position and situation, I could concentrate more on the problem at hand. What was I missing? "It must be fuel," I thought. "Tanks are full. Fuel selector on 'Both.' Mixture rich.... Nothing is helping. So what now?"
"Fly the plane. Fly the plane. Fly the plane. Trim for best glide. Set a direct heading to the airport. You get one shot. What are the winds? Manage energy... Uhm. Oh sh*t, there's a damn lake at the end of the runway! You must be kidding."
Let's just say that I approached high and dropped the flaps at the last minute. I may have landed long. But I wasn't wet! Or worse!
Right before touching down (yes, on the runway) I remember thinking about how I was going to have to PUSH the plane from the runway to get it clear. But, that wasn't the case. As soon as the wheels touched the runway, the engine started and ran perfectly. Unbelievable. I taxied to parking. Fifteen minutes later, I was able to think straight, get my legs under me and exit the airplane.
If you carefully read the POH for early Cessna 172s, the POH cautions you about flying on both tanks when cruising at altitudes over 5000 ft. Doing so may cause "power irregularities" (A.K.A. engine failure). But I guess this is okay if it is in the POH. Just switch to one tank, ignore the sputtering, glide for 60 (very long) seconds, then switch to the other tank and hope the vapor has cleared and the engine restarts. That is why many early Cessna 172s have a placard on the fuel selector (between the seats, out of sight) that says something to the effect of "Use single tank above 5000 ft." Yes, on those models, it matters.
The decision to fly on Left, Right, or Both may not be a simple judgement call. The decision shouldn't be based on the consensus opinion of you and your buddies. And the proper option may not even seem logical. You must read the POH, ADs, and ACs for your aircraft and follow their guidance. Your life may depend on it.
Example C172 POH: http://rob.com/matt/manuals/172_poh_59.pdf
Actual Fuel Management Procedure - 1959 Cessna 172
Whether or not you originally purchased your DynaVibe system with the NIST certification, year-end is a good time to think about calibrating your DynaVibe. Why does it matter? Here are some reasons to consider sending your DynaVibe in for calibration:
Compliance. You may have a requirement to keep your DynaVibe unit compliant with FAA requirements for tool calibrations. This needs to happen annually, and you can tell when your DynaVibe system calibration is due by the following methods:
Convenience. When the certification on tools that need calibration lapses, it creates inconvenience and can delay service procedures that require them. RPX makes calibrating your DynaVibe unit simple: send your unit in, and we calibrate and return it within a few days!
Confidence. Calibrating your DynaVibe ensures that the accuracy hasn’t drifted and the readings are precise.
When you send your DynaVibe to RPX for calibration, the team does a complete inspection of your unit, calibrating it, inspecting the cables and accelerometers, and for GX units, upgrading to latest version of firmware. Furthermore, the calibration process is fast, taking only a couple of days and return shipping, UPS Ground, is free in the United States*! The RPX technicians will even include a new strip of reflective tape for calibrations done before year-end 2017.
To have your DynaVibe unit calibrated, simply contact the RPX team:
To have your DynaVibe system calibrated, simply visit the RPX online store to place your order (the cost of calibrating a DynaVibe Classic is $199, and $299 for a GX unit). If you have any questions about the DynaVibe calibration process, please contact us:
Offer: For a limited time, get $1,000 for trading in your DynaVibe Classic for a new DynaVibe GX3, which comes with NIST certification. Call us for details!
* Free UPS Ground shipping to lower 48 states only; Alaska and Hawaii not included.